VGA + Audio + RS232 over UTP Receiver with Skew Correction VGA + Audio + RS232 over UTP Receiver with Skew Correction
4.5 stars - "Review for VGA + Audio + RS232 over UTP Receiver with Skew Correction" This VGA + Audio + RS232 over UTP Receiver with Skew Correction is the best Switchers DAs Extenders I have tried.
  • VGA + Audio + RS232 over UTP Receiver with Skew Correction - Image 1
  • VGA + Audio + RS232 over UTP Receiver with Skew Correction - Image 2
  • VGA + Audio + RS232 over UTP Receiver with Skew Correction - Image 1
  • VGA + Audio + RS232 over UTP Receiver with Skew Correction - Image 2
Hall Research

VGA + Audio + RS232 over UTP Receiver with Skew Correction

Product ID: URA-232-E
Brand: Hall Research

View or buy the Switchers DAs Extenders Audio Visual - VGA + Audio + RS232 over UTP Receiver with Skew Correction from Hall Research to discover other options and shipping details.

Description

Hall Research
VGA + Audio + RS232 over UTP Receiver with Skew Correction

VGA + Audio + RS232 Over UTP Receiver

The URA-232 is a video, audio and uni-directional RS-232 over UTP receiver.
The receiver is located at a distance from the AV/RS-232 source and connected to a compatible UTP sender or extender.
The URA-232 has a digital input configurable as "Contact" or "Voltage".
User defined serial strings can be sent depending on the state of the digital input and also remotely from a compatible UVA-232-4 or UVA-232-8 sender or via serial command.
Using the remote capability, you can have URA-232 and URA-232-XT units daisy chained and talk to all the connected devices serially with each sending the same or completely different serial strings.

In a typical application the RS-232 port on the unit is used for transmit only to issue power commands to connected displays (the RS-232 RX pin is used for programming the URA-232 for remote trigger operation).
There are 3 ways to issue commands please see 
Serial Command Modes Demystified for further information.


Important note about use with YPbPr signal

Using the standard URA-232 with Component Video can produce a excessive brightness and contrast. Therefore, this unit is not recommended for use with Component Video (YPbPr).

For use with YPbPr signals, please order the model URA-232-CP. The cost is the same and the unit is identical in every way except it is optimized for Component Video signal levels.


  • Receives audio, video and uni-directional RS232 on a single UTP cable
  • Adjustable cable length compensation to 1000 ft
  • RGB skew correction
  • Digitally controlled adjustment eliminates tweaking pots
  • Supports resolutions up to 1920x1200 at any refresh rate
  • Compact & rugged metal enclosure with mounting holes
  • Easily expandable by daisy-chaining receivers (URA-232-XT)
  • Configurable Discrete Input - Contact Closure or Voltage (5-30 vDC)
  • Software GUI
Video Gain:
  • Unity
Video Standards:
  • VGA through UXGA, RGBHV, RGBS, RGsB, RsGsBs, Component Video (bi-/tri-level sync)
Connectors:
  • (1) RJ-45 Female (CATx Input)
  • (1) HD15 Female (Video Output)
  • (1) 3.5mm Female (Audio Output)
  • (1) 2.1mm Female (Power Input)
  • (1) 4 Position TB
Nominal Amplitude:
  • 1 V p-p for Y of component video 
  • 0.7 V p-p for RGB and for Pr and Pb of component video
  • 4.0 V to 5.0 V p-p, for TTL Sync signals of RGBHV, RGBS
Impedance:
  • 75 ohms
Resolution:
  • Up to 1920x1200 non-interlaced at 60Hz
Max Distance:
  • Up to 1000 feet depending on resolution
Audio Gain:
  • Unbalanced output: 0 dB
Frequency Response:
  • 20hz to 20kHz, +/- 1 dB
Audio Type:
  • Monaural, Simulated Stereo (L+R)
THD + Noise:
  • 0.2% @ 1kHz, 0.3% @ 20kHz at nominal level
Recommended Cable:
Power Supply:
  • 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2A regulated; 2.1mm
Temperature
  • Humidity:
  • Storage: -40 to +158 degF (-40 to +70 degC) / 10% to 90%, non-condensing
  • Operating: +32 to +122 degF (0 to +50 degC) / 10% to 90%, non-condensing
Cooling:
  • Convection, vents on each end
Mounting:
  • Brackets at each end with screw hole provided for Wall or Rack mounting
Enclosure:
  • Metal
Dimensions:
  • 1.18" H x 2.75" W x 3.85" D
  • (30mm H x 70mm W x 98mm D)
  • Depth excludes connectors
Weight:
  • Product - 0.75 lb (0.35 kg)
  • Shipping - 1.5 lbs (0.70 kg)
Vibration:
  • ISTA 1A in carton (International Safe Transit Association)
Safety:
  • CE
EMI/EMC:
  • CE/FCC Class A
MTBF:
  • 90,000 hours
Warranty:
  • 2 years parts and labor
More Switchers DAs Extenders and others in our range
Subscribe to GTP iCommerce Pty Ltd Clothing and Hardware